REMOVING THE AC-201 OR AC-205 AMPLIFIER FROM THE CASE

Remove the cover from the unit, lift out the platter and set it aside. Turn the unit upside down onto a pillow, foam or other material, be sure it is thick enough to support the amplifier and protect the tone arm. Remove the four screws near each of the spring feet. AT THIS POINT THE CHASSIS IS FREE FROM THE CASE AND EXTREME CARE SHOULD BE USED TO PREVENT DROPPING EITHER THE CASE OR CHASSIS. Holding the chassis and the case together, carefully turn the entire unit over to its upright position. The chassis can now be lifted out of its case, lifting the front first so as to clear the jacks on the rear panel.