INSTRUCTIONS FOR DISASSEMBLY OF MICRO-75 SOUND SYSTEM

            There are five bolts which hold the entire assembly together. Two are on the right side, two are on the left side and one is on the top. Directly under the turntable, near the center from right to left and located 3/4" back from the front edge.

            On the left side, one bolt is located 1/2" from the front and the other is located 3/8" from the back. On the right side, one is located 1/2" from the front and the other is located 3/8" from the back. Remove all 5 of these bolts and the top will separate from the bottom. Disconnect the green 10 prong plug from the power supply and the RCA plug from the jack on the side of the set below the tone arm.