SPEAKER
STANDS

 

    To get the best sound coverage, speaker placement is very important. If your speakers are not placed above the heads of the dancers, it is impossible to provide adequate sound at the rear of the hall, without having the sound too loud for the comfort of the dancers at the front. The use of  speaker stands will insure proper speaker location.

Ultimate Support Speaker Stands

NOTE: Both the TS-90 and the TS-99 need a 1" adapter to be used with Hilton speakers or any other speaker that has a 1" mounting hole.

 
 TS-90 TRIPOD 
  The TS-90 speaker stands offer the Ultimate quality as well as a number of favorite features including telelock.
1 Glass reinforced polycarbonate fitting at the leg juncture uses a over the fitting to minimize over-tightening and breakage. Unique to the TS-90 tripod is the use a Lock Lever, which speeds up set-up and gives a visual warning is it is not set up right.

2 TeleLock the exclusive feature of TS-90 stands allows one person to safely and easily raise and lower heavy speakers.  When the rotating collar is set to the raise position it lock and holds the speaker in place with each lift.  When you have the speaker at the right height rotate the collar to LOCK and your set.  To lower rotate the collar to the LOWER position to assist with the safe lowering of the speaker.

 The footcaps are held in place by both internal and external friction so they stay in place.

4 Our telescoping tube lock prevents accidentally pulling out the center tube.

 

aluminum tubing and high tech finishes make for a durable, dependable and lightweight tripod speaker stand.  

HEIGHT.............................................3’8”-6’7”

WEIGHT.............................................6lbs 4oz

BASE DIAMETER...............................47”

WEIGHT RATING...............................150 

 TS-99 TRIPOD 

   Also available is the taller TS-99 speaker stand. Same features as the TS-90 but can put the speaker over 9 feet high.

HEIGHT.............................................5’8”-9’2”

WEIGHT.............................................8 lbs 

BASE DIAMETER...............................62”

WEIGHT RATING...............................150 

 A 1" adapter converts the TS-90 and TS-99 speaker stands to mount a speaker with a 1" inside diameter mounting socket. Strong, safe, and easily installed this fitting holds 100 lbs. Use with Hilton speakers or any speaker that has a 1" diameter mounting hole.

    Also available from Ultimate are Socket inserts that can be mounted in the bottom of a speaker that doesn't have a mounting hole in it. If you don't want to cut into the speaker to be able to put it on a stand Ultimate also has mounting brackets that bolt to the bottom of a speaker so the speaker can be placed on a stand. Contact us regarding your requirements in this area.

Heavy duty nylon carrying bags are also available -- single or dual for 2 stands. Specify the model of Ultimate stand that you need the bag for and single or dual.

GEMINI ST-02 TRIPOD SPEAKER STAND         

A light weight easy to pack around speaker stand. Extends to 6' 2" and folds down to 43" for transporting. 100 pound capacity. Carrying weight is 6 lbs. A 1" adaptor is required for use with Hilton Speakers or any speaker with a 1" mounting hole in the bottom.

Contact Information

For a complete information package contact Dick Henschel at:

HILTON AUDIO PRODUCTS, INC.
1033-E Shary Circle, Concord, California 94518
Phone: 925-682-8390 - Fax: 925-682-8497 - E-mail: hiltonaud@aol.com

For current Pricing  

Copyright © 2007 - Hilton Audio Products, Inc.